WENZHOU JINGHUA MACHINERY CO.,LTD
 |
| Quantity: | |
|---|---|
SJRM65-800
SJRM65-800
TT or LC
60 days
SJRM65- 800 PVC plastic label film blowing machine
This machine use PVC plastic resin to make various hot shrink film under expanded-tube method processing. The film is high transparency, good lustre, high shrinkage, it is new popular packaging material nowadays. Widely used food, beverage, tea, glass products, handicraft, sanitary ware and cosmetics. Outerwear of products, electronic products, etc.
Features:
1. The unit is mainly composed of plastic extruder, air ring, head device, traction device, cooling device, heating expansion device, rewinding device, heating system and electronic control device.
2. The main parts of screw and barrel are made of 38GrMoAIA high-quality alloy steel, which has high hardness, wear resistance and corrosion resistance after finishing and ammoniation treatment.
3. advantaged screw with a length of 1:28 is suitable for mixing and plasticizing polyvinyl chloride (PVC) plastics with high melt viscosity and poor thermal stability.
4. The automatic temperature control system is equipped to control the heaters and cooling fans of the fuselage so as to keep the temperature constant, accurate and in line with the technological requirements of film production and ensure the excellent quality of the heat recovery film.
5. The special structure of die head and air ring is favorable for plasticizing and cooling requirements.
6. Easy to operate, compact structure, centralized control and high degree of automation.
The whole machine is divided into four parts: main machine part, traction device, temperature control box and Rewinding part. The details are as follows:
Parameters:
Model: | SJRM-65*28/800 |
Film width | 300-800mm |
Film thickness | 0.02-0.1mm |
Output | 80kg/h |
Screw diameter | 65mm |
Screw ratio L/D | 1:28 |
Main motor power | 30kw |
Total heating power | 10kw |
Cooling mode | water control |
Traction power | 3kw |
Winding power | 15 kg/Nm |
Die head size | 140 mm |
Automatic temperature control | 6sets |
Drawing winding speed | 5-40m/min |
Width of drawing roll surface | 900mm |
Total unit weight | 2200kg |
General power supply of unit | 50 HZ 380V 3P/ or 60HZ 220V 3P |
Machine volume (L * W * H) | 5500*2000*3200mm |
Configuration sheet:
1. Gear box with hard tooth surface (national standard)
2. Screw Φ 65mm 28:1 hard chrome plating
3. Material barrel, 3 with fan cooling, 250W
4. Die head: continuous rotation，Φ140
5. Air ring: high pressure air inlet
6. First pass of stretching roller Φ 140 * 800, the third lane Φ 140*800
7. The first stretch of turbine box is 60 type, with 1.5KW frequency conversion
Turbine box first drawing 70 type, 3KW frequency conversion
8. Hot water tank: stainless steel, with built-in U-shaped heating pipe with a length of 400-550mm
Power 3kw * 6, voltage 380V 6
9. Thermocouple: stainless steel, 150mm long, extending into the hot water tank
10 winding roller 127 * 900mm
11. Motor frequency conversion 1.5KW turbine box 70
12. Winding shaft extension type, tension control (with friction plate)
13. Requirements for rubber roller: the hardness of silicone used in the hot water tank is 80
The third stretch roll is made of nitrile rubber with a hardness of 90 degrees
14. Splint. Front splint 800 * 500
Rear splint: 1000 * 800 stainless steel
15. The slider presses the adjusting screw M16. The spring is thickened by 5.52mm, and the outer diameter of the spring is 40-37mm. The rear tension roller can directly press the four corners at the rear end of the screw head. Make cross hole for adjustment.
SJRM65- 800 PVC plastic label film blowing machine
This machine use PVC plastic resin to make various hot shrink film under expanded-tube method processing. The film is high transparency, good lustre, high shrinkage, it is new popular packaging material nowadays. Widely used food, beverage, tea, glass products, handicraft, sanitary ware and cosmetics. Outerwear of products, electronic products, etc.
Features:
1. The unit is mainly composed of plastic extruder, air ring, head device, traction device, cooling device, heating expansion device, rewinding device, heating system and electronic control device.
2. The main parts of screw and barrel are made of 38GrMoAIA high-quality alloy steel, which has high hardness, wear resistance and corrosion resistance after finishing and ammoniation treatment.
3. advantaged screw with a length of 1:28 is suitable for mixing and plasticizing polyvinyl chloride (PVC) plastics with high melt viscosity and poor thermal stability.
4. The automatic temperature control system is equipped to control the heaters and cooling fans of the fuselage so as to keep the temperature constant, accurate and in line with the technological requirements of film production and ensure the excellent quality of the heat recovery film.
5. The special structure of die head and air ring is favorable for plasticizing and cooling requirements.
6. Easy to operate, compact structure, centralized control and high degree of automation.
The whole machine is divided into four parts: main machine part, traction device, temperature control box and Rewinding part. The details are as follows:
Parameters:
Model: | SJRM-65*28/800 |
Film width | 300-800mm |
Film thickness | 0.02-0.1mm |
Output | 80kg/h |
Screw diameter | 65mm |
Screw ratio L/D | 1:28 |
Main motor power | 30kw |
Total heating power | 10kw |
Cooling mode | water control |
Traction power | 3kw |
Winding power | 15 kg/Nm |
Die head size | 140 mm |
Automatic temperature control | 6sets |
Drawing winding speed | 5-40m/min |
Width of drawing roll surface | 900mm |
Total unit weight | 2200kg |
General power supply of unit | 50 HZ 380V 3P/ or 60HZ 220V 3P |
Machine volume (L * W * H) | 5500*2000*3200mm |
Configuration sheet:
1. Gear box with hard tooth surface (national standard)
2. Screw Φ 65mm 28:1 hard chrome plating
3. Material barrel, 3 with fan cooling, 250W
4. Die head: continuous rotation，Φ140
5. Air ring: high pressure air inlet
6. First pass of stretching roller Φ 140 * 800, the third lane Φ 140*800
7. The first stretch of turbine box is 60 type, with 1.5KW frequency conversion
Turbine box first drawing 70 type, 3KW frequency conversion
8. Hot water tank: stainless steel, with built-in U-shaped heating pipe with a length of 400-550mm
Power 3kw * 6, voltage 380V 6
9. Thermocouple: stainless steel, 150mm long, extending into the hot water tank
10 winding roller 127 * 900mm
11. Motor frequency conversion 1.5KW turbine box 70
12. Winding shaft extension type, tension control (with friction plate)
13. Requirements for rubber roller: the hardness of silicone used in the hot water tank is 80
The third stretch roll is made of nitrile rubber with a hardness of 90 degrees
14. Splint. Front splint 800 * 500
Rear splint: 1000 * 800 stainless steel
15. The slider presses the adjusting screw M16. The spring is thickened by 5.52mm, and the outer diameter of the spring is 40-37mm. The rear tension roller can directly press the four corners at the rear end of the screw head. Make cross hole for adjustment.
